Kia Sportage: Hydraulic System

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System

Automatic Transaxle: Repair procedures

Removal 1. Remove the following items; • Engine cover (A). • Air cleaner assembly and air duct (B). (Refer to "Intake and Exhaust system" in EM group.) • Batter ...

Description and Operation

Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filt ...

Other Information:

Trailing Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bol ...

3 Point rear center belt
To fasten the rear center belt 1.Extract the tongue plate from the hole on the belt assembly cover and slowly pull the tongue plates out from the retractor. 2.Insert the tongue plate (A) into ...