Kia Sportage: Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels.
The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.
Hydraulic System
...

Components and Components Location
Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly ...

Other Information:

Fuel Pressure Control Valve: Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel ...

ICM (Integrated Circuit Module) Relay Box: Components and Components Location
Component Pin Information NoConnector ANoConnector A1Rear wiper motor (Power)11IPM (Rear wiper 15A)2IPM12Rear wiper motor (Signal)3Stop lamp13-4-14-5ESC unit15GND6U_H_Box (ABS 7.5A fuse)16IPM (B ...

Categories

Copyright www.kispmanual.com 2014-2026