Kia Sportage: ICM (Integrated Circuit Module) Relay Box: Description and Operation - Fuses And Relays - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: ICM (Integrated Circuit Module) Relay Box: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Fuses And Relays / ICM (Integrated Circuit Module) Relay Box: Description and Operation

Description
The ICM relay (A) is united with rear wiper relay, and DBC relay which installed inside the lower crash pad.

ICM (Integrated Circuit Module) Relay Box: Schematic Diagrams
Schematic Diagram ...

ICM (Integrated Circuit Module) Relay Box: Repair procedures
Inspection Rear Wiper Relay Check for continuity between the terminals. 1. There should be continuity between the No.11 in the A and No.12 in the A terminals when power and ground are connect ...

Other Information:

Hazard Lamp Switch: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel (A). (Refer to BE group - "Audio unit")     Take care not to damage and sc ...

SRS Control Module (SRSCM): Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Disconnect the DAB, PAB, SAB, CA ...

Categories

Copyright www.kispmanual.com 2014-2026