Kia Sportage: Inhibitor Switch: Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Inhibitor Switch: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch: Description and Operation

Description
Inhibitor Switch monitors the lever''s position(P, R, N, D) and is used to control gear setting signals.

SS-B Solenoid Valve(ON/OFF): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

Inhibitor Switch: Specifications
Specifications ? Type: Combination of output signals from 4 terminals Power supply (V)12Output typeCombination of output signals Signal Code Table ?PP-RRR-NNN-DDS112V12V00000S2012V12V12V00 ...

Other Information:

Main fuse and multi fuse
If the main fuse and multi fuse is blown, it must be removed as follows: 1.Disconnect the negative battery cable. 2.Remove the nuts shown in the picture above. 3.Replace the fuse with a new one o ...

Receiver-Drier: Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft) 2. Remove the ...

Categories


Copyright © www.kispmanual.com 2014-2025