When the ignition switch is on, press the illumination control button to adjust the brightness of the instrument panel illumination.
Rail Pressure Sensor (RPS): Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Rear Disc Brake: Repair procedures
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)
2.
Remove the rear shock absorber (A). [2WD Only]
(Refer to the Susp ...