Kia Sportage: Junction Turning functionThe Junction Turning function responds in stages when it detects a possible collision while the vehicle is turning. Depending on the situation, it may warn the driver, assist with emergency braking, bring the vehicle to a stop and then end brake control.
Collision warning
Emergency braking
Vehicle stop and end of brake control
Collision warning
![]() |
A: Collision warning |
The system may alert the driver with a flashing Forward Safety warning light
, an instrument-cluster
message, an audible warning and steering-wheel vibration, if equipped.
The collision warning function operates under the following approximate speed conditions:
Your vehicle speed: 10–30 km/h (6–19 mph)
Oncoming vehicle speed: 30–70 km/h (19–44 mph)
Powered two-wheeler or cyclist speed: 15–70 km/h (9–44 mph)
Emergency braking
![]() |
A: Emergency braking |
When emergency braking is activated, the Forward Safety warning light flashes
. The system may also
display a warning message, sound an alert and vibrate the steering wheel, if equipped. Brake assistance is applied to
help avoid a collision with an oncoming vehicle.
Emergency braking operates under the following approximate speed conditions:
Your vehicle speed: 10–30 km/h (6–19 mph)
Oncoming vehicle speed: 30–70 km/h (19–44 mph)
Powered two-wheeler or cyclist speed: 15–70 km/h (9–44 mph)
Vehicle stop and end of brake control
![]() |
A: Drive carefully |
If emergency braking stops the vehicle, a warning message appears on the instrument cluster.
Press the brake pedal immediately and check the surroundings before moving again.
Brake control ends approximately two seconds after the vehicle has been stopped by emergency braking.
NOTE
The warning sound during a collision warning or emergency braking can be silenced by pressing the hazard warning flasher switch.
TIP
When turning right at an intersection, brake assistance may help reduce or avoid a collision if the system detects a risk involving an oncoming powered two-wheeler or cyclist.
Distributing the Sealant. Checking Tyre Inflation Pressure
Distributing the Sealant
Procedure
Drive immediately for approximately 7–10 km (4–6 miles), or about 10 minutes, to spread the sealant evenly inside
...
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUseAlternator pulley remover wrench(09373-27000)Removal and installation of alternator pulley
...
Parking on hills
Generally, if you have a trailer attached to your vehicle, you should not park
your vehicle on a hill. People can be seriously or fatally injured, and both your
vehicle and the trailer can be dama...