Kia Sportage: Mode Control Actuator: Description and Operation - Heater - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Mode Control Actuator: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Heater / Mode Control Actuator: Description and Operation

Description
The mode control actuator is located at the heater unit.
It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of vent> B/L > floor > mix.
Mode Control Actuator: Components and Components Location
Component Location ...

Mode Control Actuator: Repair procedures
Inspection 1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the term ...

Other Information:

Front Lower Arm: Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 07.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...

Manifold Absolute Pressure Sensor (MAPS): Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

Categories

Copyright www.kispmanual.com 2014-2026