Kia Optima Manuals

Kia Sportage: Refrigerant line: Repair procedures - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Refrigerant line: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Refrigerant line: Repair procedures

Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
   
Cap the open fittings immediately to keep moisture or dirt out of the system.
3.
Tighten joint of bolt or nut to specified torque.
   
Connections should not be torque tighter than the specified torque.
Part tightened
N.m
Kgf.m
lb-ft
Condenser - Discharge hose
3.9~9.8
0.6~1.0
4.3~7.2
Condenser - Liquid tube
Compressor - Discharge hose
19.6~24.5
2.0~2.5
14.4~18.0
Compressor - Suction hose
Expansion valve - Evaporator
11.8~14.7
1.2~1.5
8.7~10.9

4.
Evacuate air in refrigeration system and charge system with refrigerant.
Specified amount : 550 ± 25g (19.4 ± 0.88oz)
5.
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant.
6.
Inspect A/C operation.
Refrigerant line: Components and Components Location
Component Location ...

Compressor: Components and Components Location
Components 1. Bolt2. Disc & Hub Assembly 3. Retainer Ring (Pulley)4. Pulley5. Retainer Ring (Field coil)6. Field Coil7. Compressor Assembly ...

Other Information:

Line Pressure Control Solenoid Valve: Specifications
Specifications Direct control VFS[LINE Pressure] ? Control type : Normal high type Control Pressure kpa (kgf/cm?, psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...

Rear Hub - Carrier: Components and Components Location
Components 1. Hub cover2. Carrier assembly3. Hub & bearing assembly4. Hub mounting bolt5. Bushing6. Bushing7. Carrier assembly8. Bearing9. Snap ring10. Hub assembly11. Hub bolt12. Bushing ...

Categories

Copyright www.kispmanual.com 2014-2026