Kia Sportage: Side Airbag (SAB) Module: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Restraint / Airbag Module / Side Airbag (SAB) Module: Description and Operation

Description

The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.

Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Passenger Airbag (PAB) Module: Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the crash pad garnish. (Refer to the Body group- crash pad). 3. Disco ...

Side Airbag (SAB) Module: Components and Components Location

Components ...

Other Information:

USING THE USB DEVICE
To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine when the USB device is connecte ...

Description and Operation
Description Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to con ...

Kia Sportage: Side Airbag (SAB) Module: Description and Operation

Passenger Airbag (PAB) Module: Repair procedures

Side Airbag (SAB) Module: Components and Components Location

Other Information:

Categories