Kia Sportage: Special Service Tools - Engine Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Special Service Tools

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Electrical System / Special Service Tools

Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)

Removal and installation of alternator pulley

Specifications
Specifications Ignition System ItemsSpecificationsIgnition coilPrimary resistance0.62 ± 10 % (?)Secondary resistance7.0 ± 15 % (k?)Spark plugsTypeZXU20HCR8Gap0.7 ~0.8 mm (0.0276 ~ 0.0315 in.) ...

Troubleshooting
Trouble Shooting Ignition System SymptomSuspect areaRemedyEngine will not start or is hard to start (Cranks OK)Ignition lock switchInspect ignition lock switch, or replace as requiredIgnition co ...

Other Information:

Input Speed Sensor: Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. (R ...

CVVT Oil Control Valve (OCV): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specifi ...

Categories

Copyright www.kispmanual.com 2014-2026