Kia Sportage: Specifications
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Multifunction switch / Specifications
| Specifications |
| Items | Specifications | |
| Rated voltage | DC 12V | |
| Operating temperature range | -22 ~ +176°F (-30°C ~ +80°C) | |
| Rated load | Dimmer & passing switch | High : 0.2A (Relay load) Low : 0.2A (Relay load) Passing : 0.2A (Relay load) |
| Lighting switch | Lighting : 0.2A (Relay load) | |
| Turn signal switch | 6.6 ± 0.5A (Lamp load) | |
| Wiper & mist switch | Low, High : 4.5A (Motor load) Intermittent : 0.22 ± 0.05A (Relay load) Lock : Max. 28A (Motor load) Washer : 4.0A (Motor load) | |
| Front fog lamp switch | 0.2A (Relay load) | |
| Rear wiper & washer | Wiper : 1.0A (Relay load) Washer : 4.0A (Motor load) | |
Components and Components Location
Component (1)
1. Steering column shaft2. Lighting switch3. Wiper and washer switch4. Screw5. Clock spring
Component (2)
...
Other Information:
Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to the BD group - "Front door")
2.
Remove the front door module.
3.
Disconnect the 7P connector from ...
Malfunction Indicator Light (MIL) (check engine light)
This indicator light is part of the Engine Control System which monitors various
emission control system components. If this light illuminates while driving, it
indicates that a potential malfun ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024