Kia Sportage: AUX(Auxiliary) Jack: Repair procedures

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / AVN System / AUX(Auxiliary) Jack: Repair procedures

Removal

1.	Remove the knob. Remove the floor console upper cover (A) using the appropriate tool. (Refer to the BD group - "Console")

Loosen screws (2EA) and remove the floor console tray (A).

Take care not to damage the hook when removing the switch.

3.	Disconnect the connectors (A) from the floor console tray.

4.	Remove the multimedia jack (A) from the floor console tray after pressing the hooks.

Installation

1.	Install the multimedia jack.

2.	Install the floor console tray.

3.	Install the floor console upper cover.

AUX(Auxiliary) Jack: Schematic Diagrams

Circuit Diagram ...

Troubleshooting

Troubleshooting Guide Before Thinking The Product Has Malfunctioned 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. ...

Other Information:

To resume cruising speed at more than approximately 40 km/h (25 mph)
If any method other than the cruise ON-OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES + switch i ...

Windshield defrosting and defogging
WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and the windshield co ...

Kia Sportage: AUX(Auxiliary) Jack: Repair procedures

AUX(Auxiliary) Jack: Schematic Diagrams

Troubleshooting

Other Information:

Categories