Kia Sportage: Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / General Information / Specifications

Specification

Air Conditioner

Item		Specification
Compressor	Type	DVE16
	Oil type & Capacity	PAG OIL 120±10
	Pulley type	6PK-TYPE
	Displacement	160cc/rev
Condenser	Heat rejection	14,000 ±5% kcal/hr
A/C Pressure transducer	The method to measure the pressure	Voltage= 0.00878835 * Pressure (psig) + 0.5
Expansion valve	Type	Block type
Refrigerant	Type	R-134a
Refrigerant	Capacity [g.(oz)]	550±25 (19.4±0.88)

Blower Unit

Item		Specification
Fresh and recirculation	Operating method	Actuator
Blower	Type	Sirocco
	Speed step	Auto + 8 speed (Automatic), 1~4speed (Manual)
	Speed control	Power mosfet (Auto), Resistor(manual)
Air filter	Type	Particle filter

Heater And Evaporator Unit

Item		Specification
Heater	Type	Pin & Tube type
	Heating capacity	4,600 - 5% kcal/hr
	Mode operating method	Actuator
	Temperature operating method	Actuator
Evaporator	Temperature control type	Evaporator temperature sensor
Evaporator	A/C ON/OFF [°C(°F)]	ON : 1.5 ± 0.5 (34.7 ± 32.9) OFF: -0.5 ± 0.5 (32.9 ± 32.9)

Troubleshooting

Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. ...

Other Information:

Headrest
The rear seat(s) is equipped with headrests in all the seating positions for the occupant's safety and comfort. The headrest not only provides comfort for passengers, but also helps protect ...

Armed stage
Park the car and stop the engine. Arm the system as described below. 1.Remove the ignition key from the ignition switch and exit the vehicle. 2.Make sure that all doors (and tailgate) and engine hoo ...

Kia Sportage: Specifications

General Information

Troubleshooting

Other Information:

Categories