Kia Sportage: A/C Pressure Transducer: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / A/C Pressure Transducer: Components and Components Location

Receiver-Drier: Repair procedures

Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft) 2. Remove the ...

A/C Pressure Transducer: Description and Operation

Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after it is measured. By voltage value, the engine ECU controls cooling fan by operating ...

Other Information:

Cruise Control Switch: Repair procedures
Removal and Installation 1. Disconnect the battery (-) terminal. Tightening torque: Without battery sensor : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft) With battery sensor : 4.0 ~ 6.0N ...

Climate Seat: Components and Components Location
Components 1. Ventilation blower2. Ventilation ECU3. Ventilation seat switch4. Blower connector5. Heater connector6. Ventilation ECU connector ...