Kia Sportage: Ambient Sensor: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Sensor: Repair procedures

Inspection

1.	Ignition "OFF"

2.	Disconnect ambient temperature sensor.

Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing of the ambient temperature.

1. Sensor Ground

2. Ambient Sensor Signal

Specification

Ambient temperature [°C(°F)]	Resistance between terminals 1and 2 (k?)
-30(-22)	507
-20(-4)	284.5
-10(14)	164.2
0 (32)	97.5
10 (50)	59.6
20 (68)	37.46
30(86)	24.18
40(104)	16
50(122)	10.83

4.	If the measured resistance is not specification, substitute with a known-good ambient temperature sensor and check for proper operation.

5.	If the problem is corrected, replace the ambient temperature sensor.

Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Disconnect the connector and then remove the ambient temperature sensor (A).

3.	Installation is the reverse order of removal.

Ambient Sensor: Description and Operation

Description 1. The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lowe ...

Cluster ionizer: Components and Components Location

Component Location ...

Other Information:

Special Service Tools
Special Service Tools Tool Name / NumberIllustrationDescriptionLower arm ball joint remover0K545-A9100Removal of front lower arm from front axle ...

Brake Pedal: Components and Components Location
Components 1. Cowl bracket2. Brake pedal member assembly3. Stop lamp switch4. Return spring5. Brake pedal stopper6. Clevis pin7. Snap pin8. Brake pedal ...

Kia Sportage: Ambient Sensor: Repair procedures

Ambient Sensor: Description and Operation

Cluster ionizer: Components and Components Location

Other Information:

Categories