Kia Sportage: Intake Actuator: Components and Components Location - Blower - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Intake Actuator: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator: Components and Components Location

Component Location

Climate Control Air Filter: Repair procedures
Replacement 1. Disconnect the damper (B) and glove box lift (C) from the glove box (A). 2. Remove the filter cover with pushing the knob. 3. Replace the air filter (B), install it after ma ...

Intake Actuator: Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Other Information:

Power Door Lock Actuators: Repair procedures
Inspection Front Door Lock Actuator 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. (Refer to the BD group - "Front door") 3. Disc ...

Crankshaft Position Sensor (CKPS): Description and Operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine ...

Categories

Copyright www.kispmanual.com 2014-2026