The fuel filler lid must be opened from inside the vehicle by pulling up the fuel filler lid opener.
If the fuel filler lid does not open because ice has formed around it, tap lightly or push on the lid to break the ice and release the lid. Do not pry on the lid. If necessary, spray around the lid with an approved de-icer fluid (do not use radiator anti-freeze) or move the vehicle to a warm place and allow the ice to melt.
1.Stop the engine.
2.To open the fuel filler lid, pull up the fuel filler lid opener.
3.Pull open the fuel filler lid (1).
4.To remove the cap, turn the fuel filler cap (2) counterclockwise.
5.Refuel as needed.
Engine Mounting: Components and Components Location
Components
1. Transaxle mounting bracket 2. Roll rod bracket3. Sub frame 4. Engine mounting bracket5. Engine mounting support bracket
...
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold.
· At Cold Engine [Engine Coolant Temperatur ...