The fan speed can be set to the desired speed by operating the fan speed control switch.
To change the fan speed, press ()
the switch for higher speed, or push (
)
the switch for lower speed. To turn the fan speed control off, press the front blower
OFF button.
Rheostat: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Remove the crash pad side switch assembly (A) af ...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be use ...