When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body-to-tire clearance, snow chain clearance, speedometer and odometer calibration, headlight aim and bumper height.
Heated Oxygen Sensor (HO2S): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
4.
Measure resistance between the HO2S t ...
Do not install a child restraint on the front passenger’s seat.
Never place a rear-facing child restraint in the front passenger’s seat. If the
air bag deploys, it would impact the rear-facing child restraint, causing serious
or fatal injury.
In addition, d ...