Kia Optima Manuals

Kia Sportage: Muffler: Repair procedures - Intake And Exhaust System - Engine Mechanical System - Kia Sportage SL Service & Repair ManualKia Sportage: Muffler: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Intake And Exhaust System / Muffler: Repair procedures

Removal and Installation
1.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

2.
Remove the catalytic converter (B) after removing the rear oxygen sensor (A).
Tightening torque:
Oxygen sensor (A): 44.1 ~ 49.0 N.m (4.5 ~ 5.0 kgf.m, 32.5 ~ 36.2 lb-ft)
Nuts (B): 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.
Remove the center muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

4.
Remove the main muffler (A).

5.
Installation is the reverse order of removal.
   
When installing, replace with new gaskets.
Muffler: Components and Components Location
Components 1. Front muffler2. Catalytic converter3. Center muffler4. Main muffler5. Gasket ...

Engine Electrical System
...

Other Information:

A/C Pressure Transducer: Description and Operation
Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after it is measured. By voltage value, the engine ECU controls cooling fan by operating ...

Driver's and passenger's front air bag
Driver’s front air bag Passenger’s front air bag Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System and lap/shoulder belts at both the driver and passenger seati ...

Categories


Copyright © www.kispmanual.com 2014-2025