Transaxle oil temperature sensor monitors the automatic
transaxle fluid''s temperature and conveys the readings to TCM. It is an
NTC (Negative Thermal Coefficient) sensor whose resistance has an
inversely proportional relationship with the temperature level. Data
produced by this sensor is used to identify damper clutch activation and
deactivation zones within the low temperature and high temperature
range and to compensate hydraulic pressure levels during gear changes.
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check point. ...
Specifications
? Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]Resistance (k?)(-40)-4048.1(-20)-4.015.6(0)32.05.88(20)68.02.51(40)104.01.11(60)140.00.61(80)176.00.32(100)212.00.18(120)248 ...
Other Information:
Propeller Shaft: Repair procedures
Replacement
1.
After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts.
Tightening torque :
49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6 ...
Tilting the sunroof
Before opening or closing the sunroof, open the roller blind (refer to the following
page for instructions on how to use the roller blind).
To open the sunroof, push the sunroof control lever upw ...