Kia Sportage: Input Speed Sensor: Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Input Speed Sensor: Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor: Specifications

Specifications
? Type: Hall effect sensor
Operation condition (°C)°F
((-)40~150)) -40~302
Air gap (mm)in.
(0.95~1.65) 0.0374~0.0649
Output voltage(V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Input Speed Sensor: Description and Operation
Description Input Speed Sensor is a vital unit that measures the rate of rotation of the input shaft inside the transmission and delivers the readings to the TCM. The sensor prov ...

Input Speed Sensor: Schematic Diagrams
Circuit Diagram ...

Other Information:

Master Cylinder: Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the battery terminal and then remove the battery. 3. Disconnect the ECM connector and the E ...

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left on the tire. Replace the tire when ...

Categories

Copyright www.kispmanual.com 2014-2026