Kia Optima Manuals

Kia Sportage: Trailing Arm: Repair procedures - Rear Suspension System - Suspension System - Kia Sportage SL Service & Repair ManualKia Sportage: Trailing Arm: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Suspension System / Rear Suspension System / Trailing Arm: Repair procedures

Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel & tire (A).
2.
Loosen the nuts & bolts and then remove the trailing arm (A) from the rear axle.
Tightening torque
34.3 ~ 53.9N.m (3.5 ~ 5.5kgf.m, 25.3 ~ 39.8lb-ft)
[2WD]

[4WD]

3.
Loosen the parking brake cable bracket bolt (A) & height sensor bracket bolt (B).
[2WD]

[4WD]

4.
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

5.
Installation is the reverse of removal.
Rear Assist Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...

Rear Cross Member: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...

Other Information:

Aux, USB and iPod® port
If your vehicle has an aux and/or USB(universal serial bus) port or iPod® port, you can use an aux port to connect audio devices and an USB port to plug in an USB and also an iPod® port to plug ...

Turn Signal Lamp: Repair procedures
Removal Rear Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to BD group - "Rear Bumper") 3. Disconnect the connector. Remove the rear ...

Categories


Copyright © www.kispmanual.com 2014-2025