Kia Sportage: Brake Pedal: Components and Components Location - Brake System - Brake System - Kia Sportage SL Service & Repair ManualKia Sportage: Brake Pedal: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Brake System / Brake System / Brake Pedal: Components and Components Location

Components

1. Cowl bracket
2. Brake pedal member assembly
3. Stop lamp switch
4. Return spring
5. Brake pedal stopper
6. Clevis pin
7. Snap pin
8. Brake pedal

Brake Line: Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservoir with a syringe.   &nb ...

Brake Pedal: Repair procedures
Removal 1. Remove the crash pad lower panel and reinforcement panel. (Refer to the Body group- crash pad). 2. Pull down steering column shaft after removing bolts and nuts. 3. Disconnect t ...

Other Information:

Rain Sensor: Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor inpu ...

Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. A wheel that is not the correct size may adv ...

Categories


Copyright © www.kispmanual.com 2014-2025