Components |
1. Guide rod bolt 2. Bleed screw 3. Caliper bracket 4. Caliper body | 5. Inner pad shim 6. Brake pad 7. Pad retainer |
Blower Resistor: Repair procedures
Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...
Voice Recognition
When using the voice recognition feature, only commands listed within the
user's manual are supported.
Be aware that during the operation of the voice recognition system, pressing
any k ...