Kia Sportage: SS-A Solenoid Valve(ON/OFF): Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: SS-A Solenoid Valve(ON/OFF): Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF): Description and Operation

Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.

Overdrive Clutch Control Solenoid Valve(OD/C_VFS): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

SS-A Solenoid Valve(ON/OFF): Specifications
Specifications ON/OFF Solenoid Valve(SS-A) ? Control type : Normal low type Control pressure kpa (kgf/cm?, psi)490.33(5.0, 71.12) Internal resistance(?)10 ~ 11 ...

Other Information:

Valve Body: Repair procedures
Removal 1. Remove the under cover (A). Tightening torque : 19.6 ~ 24.5 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.1 lb-ft) 2. Remove the drain plug (A) and drain the ATF totally and then reinstall ...

Input Speed Sensor: Description and Operation
Description Input Speed Sensor is a vital unit that measures the rate of rotation of the input shaft inside the transmission and delivers the readings to the TCM. The sensor prov ...

Categories


Copyright © www.kispmanual.com 2014-2025