1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Select the or position.
4.The outside (fresh) air will be selected automatically. If the position is selected, air conditioning will also be selected automatically.
If the air conditioning and/or outside (fresh) air position are not selected automatically, press the corresponding button manually.
DBC Switch: Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.
3.
Check the continuity between the switch terminals as ...
Start/Stop Button: Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the cluster fascia panel.
(Refer to the BD group - "Crash pad")
3.
Disconnect the connector (A).
4.
Remove the start ...