Kia Sportage: Anchor Pretensioner: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / Seat Belt Pretensioner / Anchor Pretensioner: Components and Components Location

Anchor Pretensioner: Description and Operation

Description Anchor pretensioner operates as well as belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it ...

Anchor Pretensioner: Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pi ...

Other Information:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

Accelerator Position Sensor (APS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer t ...