Kia Sportage: Climate Seat: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Seat Electrical / Climate Seat: Description and Operation

Description

The system uses a FAN under the seat to help remove the moisture and warmth from occupants and surface of the seats.

It pulls in cabin air through the blower installed under the seat cushion, and supplies the air into the seat cushion and the seat back through the duct.

1)	Make sure not to spill liquid on the seat when equipping with ventilation system seats.

2)	Because the ventilation system does not move great amounts of air, it is difficult to feel the air coming through the seat cover.

Climate Seat: Schematic Diagrams

Schematic Diagram Connector Configurations ...

Climate Seat: Repair procedures

Removal 1. Remove the front seat assembly. (Refer to BD group - "Front Seat") 2. Remove the seat back cover and cushion cover. (Refer to BD group - "Front Seat") 3. Remove the ventilatio ...

Other Information:

Front Driveshaft: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ~ ...

Exhaust Manifold: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Disconnect t ...

Kia Sportage: Climate Seat: Description and Operation

Climate Seat: Schematic Diagrams

Climate Seat: Repair procedures

Other Information:

Categories