Kia Sportage: Cowl Top Cover: Repair procedures - Exterior - Body (Interior and Exterior) - Kia Sportage SL Service & Repair ManualKia Sportage: Cowl Top Cover: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Exterior / Cowl Top Cover: Repair procedures

Replacement
1.
Remove the wiper arm cover (B).
2.
After loosening the mounting nuts, then remove the wiper arm (A).

Tightening torque :
22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

3.
Remove the washer nozzle hose (B).
4.
Detach the clips, then remove the cowl top cover (A).

5.
Installation is the reverse of removal.
   
Replace any damage clips.
Mirror: Repair procedures
Replacement Outside Rear View Mirror Assembly Replacement     Do not disassemble the mirror when painting the mirror housing. Paint the mirror housing after masking the ...

Interior
...

Other Information:

Seat Belt Buckle Switch (BS): Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Description and Operation
Limitations Of The Navigation system GPS Signal Reception State As the GPS satellite frequency is received/transmitted in straight lines, reception may not work if hiding devices are placed on ...

Categories

Copyright www.kispmanual.com 2014-2026