Kia Sportage: Luggage Room Lamp: Repair procedures - Lighting System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Luggage Room Lamp: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / Luggage Room Lamp: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver.

3.
Remove the luggage room lamp bulb in case of necessity.
Installation
1.
Replace the lamp bulb.
2.
Install the luggage room lamp assembly after connecting the lamp connector.
High Mounted stop lamp: Repair procedures
Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to the BD group - "Tailgate") 3. Remove the spoiler. (Refer to the ...

Rear combination lamp: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination ...

Other Information:

Window opening and closing
Type A The driver’s door has a master power window switch that controls all the windows in the vehicle. To open or close a window, press down or pull up the front portion of the corresponding ...

Alternator: Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal first, then the positive terminal. Tightening torque : (+) terminal : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft) (-) te ...

Categories

Copyright © www.kispmanual.com 2014-2019