Kia Sportage: Specifications - Multifunction switch - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Specifications

Third generation SL (2010Ц2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Multifunction switch / Specifications

Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-22 ~ +176∞F (-30∞C ~ +80∞C)
Rated load
Dimmer & passing
switch
High : 0.2A (Relay load)
Low : 0.2A (Relay load)
Passing : 0.2A (Relay load)
Lighting switch
Lighting : 0.2A (Relay load)
Turn signal switch
6.6 ± 0.5A (Lamp load)
Wiper & mist switch
Low, High : 4.5A (Motor load)
Intermittent : 0.22 ± 0.05A (Relay load)
Lock : Max. 28A (Motor load)
Washer : 4.0A (Motor load)
Front fog lamp switch
0.2A (Relay load)
Rear wiper & washer
Wiper : 1.0A (Relay load)
Washer : 4.0A (Motor load)

Multifunction switch
...

Components and Components Location
Component (1) 1. Steering column shaft2. Lighting switch3. Wiper and washer switch4. Screw5. Clock spring Component (2) ...

Other Information:

Mode Control Actuator: Repair procedures
Inspection 1. Ignition "OFFФ 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the termin ...

Front Fog Lamps: Repair procedures
Inspection Front Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

Categories

Copyright © www.kispmanual.com 2014-2019