Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door delta cover.
(Refer to the BD group - "Front door") |
3. |
Disconnect the connector from the door mirror. |
4. |
Verify that the mirror operates properly as shown in the table.
Mirror Heater
Turn Signal Lamp
Mirror Folding |
Master Cylinder: Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery terminal and then remove the battery.
3.
Disconnect the ECM connector and the E ...
Emission control system
The emission control system of your vehicle is covered by a written limited warranty.
Please see the warranty information contained in the Warranty & Maintenance booklet
in your vehicle.
Your ...