Inspection |
1. |
Check the handsfree remote control switch for resistance between No.3 and No.4 terminals in each switch position.
[Call + Hang Up]
[Voice]
|
Removal |
1. |
Remove the driver airbag module.
(Refer to the RT group - "Airbag module") |
2. |
Remove the steering wheel.
(Refer to the ST group - "Steering column and shaft") |
3. |
Remove the steering lower bezel (A) after loosening 2 screws and connector (B). |
4. |
Remove the handsfree remote control switch. |
Installation |
1. |
Install the handsfree remote switch to the steering wheel bezel. |
2. |
Install the steering wheel and bezel. |
3. |
Reconnect the handsfree remote control switch connector and airbag connectors.
|
4. |
Install the driver airbag module. |
Smart key: Repair procedures
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.
2.
Select the vehicle model a ...
Rear Driveshaft: Components and Components Location
Component location
1. Coupling2. Sub frame3. Assist arm4. Lower arm5. Upper arm6. Trailing arm7. Coil spring8. Shock absorber9. Stabilizer10. Drive shaft11. Differential carrier assembly
Compone ...