Kia Optima Manuals

Kia Sportage: Refrigerant line: Repair procedures - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Refrigerant line: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Refrigerant line: Repair procedures

Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
   
Cap the open fittings immediately to keep moisture or dirt out of the system.
3.
Tighten joint of bolt or nut to specified torque.
   
Connections should not be torque tighter than the specified torque.
Part tightened
N.m
Kgf.m
lb-ft
Condenser - Discharge hose
3.9~9.8
0.6~1.0
4.3~7.2
Condenser - Liquid tube
Compressor - Discharge hose
19.6~24.5
2.0~2.5
14.4~18.0
Compressor - Suction hose
Expansion valve - Evaporator
11.8~14.7
1.2~1.5
8.7~10.9

4.
Evacuate air in refrigeration system and charge system with refrigerant.
Specified amount : 550 ± 25g (19.4 ± 0.88oz)
5.
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant.
6.
Inspect A/C operation.
Refrigerant line: Components and Components Location
Component Location ...

Compressor: Components and Components Location
Components 1. Bolt2. Disc & Hub Assembly 3. Retainer Ring (Pulley)4. Pulley5. Retainer Ring (Field coil)6. Field Coil7. Compressor Assembly ...

Other Information:

Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized Kia dealer. After starting the en ...

Ambient Sensor: Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing o ...

Categories

Copyright www.kispmanual.com 2014-2026