The FLEX Steer controls steering effort as driver's preference or road condition.
You can select the desired steering mode by pressing the FLEX Steer button.
The FLEX Steer stays in the last mode selected when turning the engine on.
When the steering mode button is pressed, the selected steering mode will appear on the LCD display.
If the steering mode button is pressed within 4 seconds, the steering mode will change as above pictures.
If the steering wheel mode button is not pressed for about 4 seconds, the LCD display will change to the previous screen.
Panoramaroof Switch: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp assembly.
(Refer to the BD group - "Roof trim")
3.
Check for continuity between the termina ...
Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally,
corners should always be taken under gentle acceleration. If you follow these suggestions,
tire wear will be he ...