Kia Sportage: Pressure Sensor: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor: Description and Operation

Description

The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status.

Oil hydraulic Motor(Actuator): Repair procedures

Inspection If you have trouble code related to the oil hydraulic motor(actuator) (P1825, P1826, P1827, P1828), check oil hydraulic motor (actuator) according to the ...

Pressure Sensor: Schematic Diagrams

Circuit Diagram ...

Other Information:

Brake Pedal: Repair procedures
Removal 1. Remove the crash pad lower panel and reinforcement panel. (Refer to the Body group- crash pad). 2. Pull down steering column shaft after removing bolts and nuts. 3. Disconnect t ...

Intake Actuator: Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Kia Sportage: Pressure Sensor: Description and Operation

Oil hydraulic Motor(Actuator): Repair procedures

Pressure Sensor: Schematic Diagrams

Other Information:

Categories