Kia Sportage: Rear Shock Absorber: Repair procedures

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Suspension System / Rear Suspension System / Rear Shock Absorber: Repair procedures

Replacement

Remove the rear wheel & tire.

Tightening torque :

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the front wheel & tire (A).

Loosen the bolt & nut and then disconnect the shock absorber (A) with the rear axle.

Tightening torque :

137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

Loosen the shock absorber mounting bolts (A).

Tightening torque :

49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)

4.	Installation is the reverse of removal.

Inspection

1.	Check the rubber parts for wear and deterioration.

2.	Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.

Rear Shock Absorber: Components and Components Location

Components 1. Self locking nut2. Bracket assembly3. Bumper rubber4. Dust cover5. Shock absorber ...

Rear Upper Arm: Repair procedures

Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage to the hub bol ...

Other Information:

Closing the fuel filler lid
1.To install the cap turn it clockwise until it clicks once. 2.Close the fuel filler lid and push it in lightly making sure that it is securely closed. ✽ NOTICE There may be an intermitten ...

ICM (Integrated Circuit Module) Relay Box: Schematic Diagrams
Schematic Diagram ...

Kia Sportage: Rear Shock Absorber: Repair procedures

Rear Shock Absorber: Components and Components Location

Rear Upper Arm: Repair procedures

Other Information:

Categories