Kia Sportage: Auto Lighting Control System

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Auto Lighting Control System

Troubleshooting

Troubleshooting SymptomPossible causeRemedyOne lamp does not light(all exterior)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not lightBulb burned out ...

Specifications

Specifications ItemsSpecificationsRated voltage5VLoadMax. 1mADetection illuminationsTail lampON : 1.57 ± 0.10 (V)OFF : 2.56 ± 0.20 (V)Head lampON : 1.57 ± 0.10 (V)OFF : 2.56 ± 0.20 (V) ...

Other Information:

Rail Pressure Sensor (RPS): Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in ...

DBC Switch: Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. 3. Check the continuity between the switch terminals as ...