Kia Sportage: Checking the amount of air conditioner refrigerant and compressor lubricant - Manual climate control system - Features of your vehicle - Kia Sportage SL Owners ManualKia Sportage: Checking the amount of air conditioner refrigerant and compressor lubricant

Third generation SL (2010–2016) / Kia Sportage SL Owners Manual / Features of your vehicle / Manual climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant

When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a negative impact on the air conditioning system.

Therefore, if abnormal operation is found, have the system inspected by an authorized Kia dealer.

WARNING

The oil and refrigerant in your vehicle's air conditioning system is under very high pressure. If proper service procedures are not followed an explosion may result. To reduce the risk of serious injury or death, the air conditioning system in your vehicle should only be serviced by trained and certified technicians.

CAUTION

It is important that the correct type and amount of oil and refrigerant is used, otherwise damage to the vehicle. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians.

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If ...

Automatic climate control system
1. AUTO (automatic control) button 2. Driver's temperature control knob 3. A/C display 4. Mode selection button 5. Air conditioning button* 6. Fan speed control switch 7. Passenger's t ...

Other Information:

Air bag warning label
Air bag warning labels, some required by the Canada Motor Vehicle Safety Standards (CMVSS), are attached to the sunvisor to alert the driver and passengers of potential risks of the air bag sy ...

Instrument Cluster: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel (A). 3. Remove the cluster assembly (A) after loosening 4 screws. 4. Disconnect the cluster ...

Categories


Copyright © www.kispmanual.com 2014-2024