Kia Sportage: Intake Actuator: Components and Components Location - Blower - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Intake Actuator: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator: Components and Components Location

Component Location

Climate Control Air Filter: Repair procedures
Replacement 1. Disconnect the damper (B) and glove box lift (C) from the glove box (A). 2. Remove the filter cover with pushing the knob. 3. Replace the air filter (B), install it after ma ...

Intake Actuator: Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Other Information:

Components and Components Location
Component Location Index Engine Room 1. Condenser2. Receiver-drier 3. Compressor 4. Expansion Valve5. Service port (High)6. Service port (Low)7. A/C Pressure Transducer Interior ...

Trailing Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bol ...

Categories

Copyright www.kispmanual.com 2014-2026