Kia Sportage: Output Speed Sensor: Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Output Speed Sensor: Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor: Specifications

Specifications
? Type: Hall effect sensor
Operation condition (°C)°F
(-40~150) -40~302
Air gap (mm)in.
(0.25~0.70) 0.0098~0.0276
Output voltage (V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Output Speed Sensor: Description and Operation
Description The Output Speed Sensor is a vital unit that measures the rate of rotation of the transmission''s turbine shaft and output shaft, and delivers the readings to the TCM. ...

Output Speed Sensor: Schematic Diagrams
Circuit Diagram ...

Other Information:

Windshield Deicer Switch: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel. (Refer to BE - "Audio") 3. Remove the heater and A/C controller (A) after disconnecting the con ...

Blower Motor: Repair procedures
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor is not operating when voltage is applied, substitute with a known-good blower motor and ...

Categories

Copyright www.kispmanual.com 2014-2025