Kia Sportage: Pressure Sensor: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor: Description and Operation
| Description |
The 4WD ECU makes a Motor Pump(Actuator) turn round for
generating an oil pressure. And then it presses a multiple disk clutch
and transfers the generated torque into rear wheels. Its torque value
varies according to a pressure status.
Oil hydraulic Motor(Actuator): Repair procedures
Inspection
If you have trouble code related to the oil hydraulic
motor(actuator) (P1825, P1826, P1827, P1828), check oil hydraulic motor
(actuator) according to the ...
Pressure Sensor: Schematic Diagrams
Circuit Diagram
...
Other Information:
Manifold Absolute Pressure Sensor (MAPS): Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Tur ...
LCD display warning
Key not in vehicle
If the smart key is not in the vehicle and if any door is opened or closed with
the ENGINE START/STOP button in the ACC, ON, or START position, the warning illuminates
on the L ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright www.kispmanual.com 2014-2026