Smart Key |
1. |
Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. |
2. |
Select the vehicle model and then do "Smart key code saving". |
3. |
After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below. |
4. |
After inserting the teaching key, push "ENTER" key. |
5. |
Input the "Pin code" for first key teaching. |
6. |
Confirm the message "First key teaching completed". |
7. |
Input the "Pin code" for second key teaching. |
8. |
Confirm the message "Second key teaching completed". |
9. |
Then the screen will be shown as below when key teaching process is completed. |
Components and Components Location
Components Location
1. Front axle2. Front lower arm3. Drive shaft4. Stabilizer bar5. Steering gearbox6. Sub frame7. Front strut assembly
...
26 Brake Control Solenoid Valve(26/B_VFS): Specifications
Specifications
Direct control VFS[26/B]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal resist ...