Inspection |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the roof trim.
(Refer to the BD group - "Roof trim") |
3. |
Remove the handsfree mic (A) after loosening the connector and screws (3EA) from roof top. |
4. |
Check the continuity of Mic between terminals. |
Blower Unit: Components and Components Location
Component Location
Components
1. Intake case (LH)2. Intake case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mofet [Auto type]7. Resistor [Manual type]8. Climate control air filter cove ...
Non-operational conditions of Back up warning system
The Back up warning system may not operate properly when:
1.Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.)
2.The sensor is covered with foreign ma ...