Kia Sportage: High Mounted stop lamp: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / High Mounted stop lamp: Repair procedures
| Removal |
| High Mounted Stop Lamp |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the tailgate trim.
(Refer to the BD group - "Tailgate") |
| 3. |
Remove the spoiler.
(Refer to the BD group - "Tailgate") |
| 4. |
Remove the high mounted stop lamp assembly (B) after disconnecting the connector (A).
|
| Installation |
| 1. |
Install the high mounted stop lamp and washer nozzle. |
| 2. |
Install the spoiler and tailgate trim.
|
License Lamps: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lens (A) and license lamp (B) after loosening 2 screws.
Installation
1.
Install the bulb.
2.
Install the license ...
Luggage Room Lamp: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver.
3.
Remove the luggage room lamp bulb in ca ...
Other Information:
Temperature Control Actuator: Components and Components Location
Component Location
...
Air cleaner
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed air.
Repla ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright www.kispmanual.com 2014-2026