Kia Sportage: Temperature Control Actuator: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Heater / Temperature Control Actuator: Description and Operation
| Description |
| 1. |
Heater unit includes mode control actuator and temperature control actuator. |
| 2. |
Temperature control actuator is located at the heater unit.
It regulates the temperature by the procedure as follows. Signal from
control unit adjusts position of temperature door by operating
temperature switch and then temperature will be regulated by the
hot/cold air ratio decided by position of temperature door |
Temperature Control Actuator: Components and Components Location
Component Location
...
Temperature Control Actuator: Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature control actuator.
3.
Verify that the temperature control actuator operates to the
hot position when connecting 12V ...
Other Information:
Front Bumper: Components and Components Location
Components
1. Front bumper cover2. Front bumper side bracket [LH]3. Front bumper side bracket [RH]
...
Fuel Tank Air Filter: Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle with a jack.
3.
Disconnect the canister close valve connector (A).
4.
Disconn ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright www.kispmanual.com 2014-2026