Replacement |
1. |
Disconnect the damper (B) and glove box lift (C) from the glove box (A). |
2. |
Remove the filter cover with pushing the knob. |
3. |
Replace the air filter (B), install it after making sure of the direction of air filter.
|
4. |
Installation is the reverse order of removal. |
Front Stabilizer Bar: Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub ...
Transaxle Oil Temperature Sensor: Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct (A).
3.
Remove the air cleaner assembly.
(1)
Disconnect the breather hose (A) and brake booster intensifier hose.
(2)
...