Kia Sportage: Canister: Repair procedures - Evaporative Emission Control System - Emission Control System - Kia Sportage SL Service & Repair ManualKia Sportage: Canister: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Emission Control System / Evaporative Emission Control System / Canister: Repair procedures

Removal
1.
Remove the fuel tank. (Refer to "Fuel tank" in FL group.)
2.
Disconnect the vapor tube quick-connector (B) and the ventilation hose (A).
3.
Remove the canister in the direction of an arrow after removing the installation screws (C).

Inspection
1.
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube

A: Canister - Atmosphere
B: Canister - Intake Manifold
C: Canister - Fuel Tank
Installation
Installation is the reverse of removal.

Canister installation screw:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)

Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. · At Cold Engine [Engine Coolant Temperatur ...

Fuel Filler Cap: Description and Operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and t ...

Other Information:

Front Fog Lamps: Repair procedures
Inspection Front Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. Slow down when ...

Categories


Copyright © www.kispmanual.com 2014-2025