Kia Sportage: Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels.
The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.
Hydraulic System
...

Components and Components Location
Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly ...

Other Information:

Compressor: Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negativ ...

Luggage Room Lamp: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver. 3. Remove the luggage room lamp bulb in ca ...

Categories

Copyright www.kispmanual.com 2014-2026